Skip to main content
Version: v3.0.0

Azure Application Insights Sink

What is it?#

The Azure Application Insights sink is an extension of the official Application Insights sink that allows you to not only emit traces or events, but the whole Application Insights suite of telemetry types - Traces, Dependencies, Events, Requests & Metrics.

You can easily configure the sink by providing the Azure Application Insights connection string or instrumentation key, but the connection string is preferred.

using Serilog;using Serilog.Configuration;
ILogger logger = new LoggerConfiguration()    .MinimumLevel.Debug()    .WriteTo.AzureApplicationInsightsWithConnectionString("<connection-string>")    .CreateLogger();
ILogger logger = new LoggerConfiguration()    .MinimumLevel.Debug()    .WriteTo.AzureApplicationInsightsWithInstrumentationKey("<key>")    .CreateLogger();

Alternatively, you can override the default minimum log level to reduce amount of telemetry being tracked :

using Serilog;using Serilog.Configuration;
ILogger logger = new LoggerConfiguration()    .MinimumLevel.Debug()    .WriteTo.AzureApplicationInsightsWithConnectionString("<connection-string>", restrictedToMinimumLevel: LogEventLevel.Warning)    .CreateLogger();

⚡ When you want to re-use an already registered TelemetryClient, pass in the IServiceProvider to the method that registers the Application Insights sink. TelemetryClients are automatically registered behind the scenes when using W3C correlation in Arcus Web API middleware (>= v1.7) or Arcus Messaging (>= v1.4).

using Serilog;using Serilog.Configuration;
ILogger logger = new LoggerConfiguration()    .MinimumLevel.Debug()    .WriteTo.AzureApplicationInsightsWithConnectionString(serviceProvider, "<connection-string>", restrictedToMinimumLevel: LogEventLevel.Warning)    .CreateLogger();

For more information on this sink: see this section.

Installation#

This feature requires to install our NuGet package

PM > Install-Package Arcus.Observability.Telemetry.Serilog.Sinks.ApplicationInsights

Configuration#

The Azure Application Insights sink has some additional configuration which can be changed to influence the tracking.

Requests#

Request ID#

When tracking requests, the ID for the request telemetry is by default a generated GUID. The generation of this ID can be configured via the options. This is useful (for example) in a service-to-service correlation system where you want the ID of the incoming request to be based on the sending system, or you want to incorporate the operation ID in the request ID.

using Serilog;using Serilog.Configuration;
ILogger logger = new LoggerConfiguration()    .WriteTo.AzureApplicationInsightsWithConnectionString("<connection-string>", options =>    {        // Configurable generation function for the telemetry request ID.        options.Request.GenerateId = () => $"my-custom-ID-{Guid.NewGuid()}";    })

Exceptions#

Properties#

When tracking exceptions, one can opt-in to track all the public properties of the exception which will be included as custom dimensions. These public properties are formatted with the following pattern: Exception-{0} where {0} is the place where the public property's name is inserted.

The value of the property will be the value of the custom dimension so that the custom dimension will be in the form "Exception-{your-property-name}" = "your-property-value".

This property format pattern can be configured, like shown in the following example:

using Serilog;using Serilog.Configuration;
ILogger logger = new LoggerConfiguration()    .WriteTo.AzureApplicationInsightsWithConnectionString("<connection-string>", options =>    {        // Opt-in to track all the first-level exception properties; inherited properties will not be included.        options.Exception.IncludeProperties = true;
        // Property format to track the exception's properties (default: `"Exception-{0}"`)        options.Exception.PropertyFormat = "CustomException.{0}");    })    .CreateLogger();

Let's take a custom exception to demonstrate:

public class OrderingException : Exception{    ...
    // Property to be included in Application Insights.    public int OrderNumber { get; }}

With this configuration, the custom dimension name for the public properties of this exception will look like this: "CustomException.OrderNumber".

⚠️ The property format should be in the correct form in order to be used. It's passed to the String.Format eventually which will try to insert the exception's property name.

Correlation#

When tracking telemetry, the correlation information is enriched via the Arcus Serilog correlation enrichment. This Serilog enricher is capable of customizing the log properties where the correlation will be added. When such custom setup is used, the same custom property names should be used here so that the Application Insights sink knows where to get the correlation information from.

string operationIdPropertyName = "MyOperationPropertyId";string transactionIdPropertyName = "MyTransactionPropertyId";string operationParentPropertyName = "MyOperationParentPropertyId";IServiceProvider serviceProvider = ...
ILogger logger = new LoggerConfiguration()    .Enrich.WithCorrelationInfo(serviceProvider, options =>    {        options.Correlation.OperationIdPropertyName = operationIdPropertyName;        options.Correlation.TransactionIdPropertyName = transactionIdPropertyName;        options.Correlation.OperationParentIdPropertyName = operationParentIdPropertyName;    })    .WriteTo.AzureApplicationInsightsWithConnectionString("<connection-string>", options =>    {        // Sets a custom property name where the operation ID should be added (default: 'OperationId').        options.Correlation.OperationIdPropertyName = operationIdPropertyName;
        // Sets a custom property name where the transaction ID should be added (default: 'TransactionId');        options.Correlation.TransactionIdPropertyName = transactionIdPropertyName;
        // Sets a custom property name where the operation parent ID should be added (default: 'OperationParentId').        options.Correlation.OperationParentIdPropertyName = operationParentIdPropertyName;    });

For more information on the way how Arcus handles correlation, see this dedicated page.

FAQ#

Q: Why do I have to configure an instrumentation key (connection string) when using the Application Insights sink#

While the native Azure Application Insights SDK does not enforce an instrumentation key we have chosen to make it mandatory to provide one.

By doing this, we allow you to fail fast and avoid running your application with a misconfigured telemetry setup. If it would be optional, you could have it running for days/weeks only to notice you are not sending any telemetry when everything is on fire and you are in the dark.

If you want to optionally use our sink when there is an instrumentation key, we recommend using this simple pattern:

using Serilog;using Serilog.Configuration;
var loggerConfig =  new LoggerConfiguration()    .MinimumLevel.Debug();
if (!string.IsNullOrWhiteSpace(key)){    loggerConfig.WriteTo.AzureApplicationInsightsWithInstrumentationKey(key);}
ILogger logger = loggerConfig.CreateLogger();

Q: Where can I initialize the logger in an ASP.NET Core application or other hosted service?#

If the connection string is stored as a secret in -for instance- Azure KeyVault, the ISecretProvider from Arcus secret store can be used to retrieve the connection string.

Use the UseSerilog extension method on IHostBuilder which accepts an ILogger and use the Serilog's static Log.Logger property to setup the logger. This allows the Startup code to have preliminary logging before we can setup logging to Application Insights. This temporary logger is used during the execution of the startup code, including the secret store retrieval for the Application Insights connection string. Setting up the preliminary logger as a 'bootstrap' logger allows to reload the logger after we've set up logging to Application Insights.

using Serilog;using Serilog.Configuration;using Arcus.Security.Core;
// Setup temporary logger to log any setup errors.Log.Logger = new LoggerConfiguration()    .MinimumLevel.Debug()    .WriteTo.Console()    .CreateBootstrapLogger();
// Build application.IHost host =     Host.CreateDefaultBuilder()        .ConfigureSecretStore((context, config, builder) =>        {            // Configure the secret store here.            // See: https://security.arcus-azure.net/features/secret-store/        })        .UseSerilog(Log.Logger)        .Build();
// Initialize Application Insights.var secretProvider = host.Services.GetRequiredService<ISecretProvider>();string connectionString = await secretProvider.GetRawSecretAsync("APPLICATIONINSIGHTS_CONNECTION_STRING");
var reloadLogger = (ReloadableLogger) Log.Logger;reloadLogger.Reload(config =>{    return config.WriteTo.AzureApplicationInsightsWithConnectionString(host.Services, connectionString);});
// Start application.await host.RunAsync();

This approach is by default used in the Arcus templates so you don't have to set this up yourself.